Enamelled CuNi45/CuNi44/CuNi40 mhangura nickel Alloy Wire
Enamelled CuNi45/CuNi44/CuNi40 Alloy Wire
Product Description
Aya enameled ekupikisa waya akashandiswa zvakanyanya kune akajairwa resistors, mota
zvikamu, mamhepo resistors, nezvimwewo uchishandisa iyo insulation processing yakanyatsokodzera kune aya maapplication, kutora mukana wakakwana weakasarudzika maficha ekunamira enamel.
Uyezve, isu tichaita enamel yekuputira insulation yesimbi yakakosha waya senge sirivheri uye platinamu waya pakuraira. Ndokumbirawo mushandise iyi kugadzira-on-odha.
Type ye bare Alloy wire
Iyo alloy yatinogona kuita enamelled iCopper-nickel alloy waya, Constantan waya, Manganin waya. Kama Wire,NiCr Alloy wire,FeCrAl Alloy wire etc waya
Mhando yekudzivirira
| Insulation-enamelled Zita | Thermal LevelºC (nguva yekushanda 2000h) | Zita rekodhi | GB Code | ANSI. TYPE |
| Polyurethane enamelled waya | 130 | UEW | QA | MW75C |
| Polyester enamelled waya | 155 | PEW | QZ | MW5C |
| Polyester-imide enamelled waya | 180 | EIW | QZY | MW30C |
| Polyester-imide uye polyamide-imide yakapetwa kaviri enameled waya | 200 | EIWH (DFWF) | QZY/XY | MW35C |
| Polyamide-imide enamelled waya | 220 | AIW | QXY | MW81C |
Chemical Content,%
| Ni | Mn | Fe | Si | Cu | Zvimwe | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 44 | 1% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Inopfuurira Service Temp | 400ºC |
| Resisivity pa20ºC | 0.49±5%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | -6(Max) |
| Melting Point | 1280ºC |
| Kusimba Kwesimba,N/mm2 Yakanamirwa, Yakapfava | 340~535 Mpa |
| Kusimba Kwesimba,N/mm3 Cold Rolled | 680~1070 Mpa |
| Elongation (anneal) | 25%(Miniti) |
| Elongation (inotonhora yakakungurutswa) | ≥Mini)2%(Miniti) |
| EMF vs Cu, μV/ºC (0~100ºC) | -43 |
| Micrographic Structure | austenite |
| Magnetic Property | Kwete |
Kushandiswa kweConstantan
Constantan imhangura-nickel alloy ine akati wandei madiki ekuwedzera
zvinhu kuti uwane chaiwo kukosha kweiyo tembiricha coefficient ye resistivity. Chenjera
kudzora kwekunyunguduka uye kushandura maitiro kunoguma kune yakaderera zvakanyanya yepinholes pa
ultra-thin thicknesses. Iyo alloy inoshandiswa zvakanyanya kune foil resistors uye strain geji.
